Been working on the dust collection system. From the main line, I have branches that go off to several different tools. Right by each tool, I installed blast gates, which allow me to turn off and on the vacuum going to each tool.
So the connection with the handle allows me to share the down pipes with two different tools. This down pipe will work with the planer and the bed sander.
Another another branch to the main line, then hooked up the vacuum to the main line. This hose is 8" wide. The main line along the ceiling is 6" and then the branches are 4" wide.
Got the router table hooked up the other night. Ordered two new connection fittings; one for band saw and one for belt sander.
The down pipe for the router table can be shared with the band saw. Moved the band saw from the corner here by the large dust collector to the corner out front by the garage door. I have another branch out front that I can run a line to the belt sander and collect alot of saw dust there.
Just a couple more connections and we can start that puppy up!!!
No comments:
Post a Comment